Everyone

TeqTic

KitKat

Do you find yourself poking your screen to keep it from turning off? Want to turn your screen on without the power button? KinScreen automatically keeps your screen on while you're using your phone, but turns it off more quickly when you aren't to save battery power.

Please check www.dontkillmyapp.com to make sure KinScreen is able to run in the background!

Brief overview
• Turn screen on with a wave
• Turn screen off with a short timeout when in pocket or face down
• Keep screen on just by holding device
• Keep screen on while using certain apps
• Keep screen on while charging
• Keep screen on while on a call
• Keep screen on indefinitely with widget, QuickSettings, or notification toggle
• Set a separate timeout for the lock screen
• Set a maximum time to keep the screen on
• Works in the dark unlike Samsung's Smart Stay
• No ads

Install now and forget about keeping your screen on! Once you feel the benefits, you will immediately notice it missing on a new device!

Customer service is a top priority at TEQTIC. If you experience an issue, please use the "Contact support" menu option inside the app or email contact@teqtic.com before leaving a negative review! We usually reply to all emails within 48 hours, and often much quicker.

Detailed overview
Turn screen on with gestures
Save the wear and tear on your power button when you turn the screen on by uncovering or waving over the proximity sensor. Uncovering the sensor allows you to pull your phone out of your pocket and have the screen turn on automatically. Waving over the sensor works great when your hands are dirty!

Keep screen on automatically
Choose from various methods to detect use of the device and keep the display on. The motion method detects small movements from you just holding the device. Waving over the proximity sensor is another method that optionally extends the timeout. The tilt angle method allows the display to stay on when propped up, even when you aren't holding it. You can also choose to have the display stay on while using certain apps, while charging, or while on a call (display still turns off when you put the phone to your ear).

Time screen out quickly to save battery
You can choose the screen timeout when no keep-on rules are actively keeping the screen on. If the screen isn't being kept on, it should time out quickly to save power. The timeout can be even shorter when the proximity sensor is covered (in-pocket or face down). You can also set a separate timeout for the lockscreen.

More information
The settings are highly customizable to your taste. Fine-tuning of parameters is locked in the free version. Please upgrade to premium to fully unlock these features and support future development! KinScreen is continually being improved based on user feedback and feature requests.

KinScreen is designed to be as efficient and battery friendly as possible. It uses little CPU and RAM, and sensor use is highly optimized. However, the proximity sensor may use considerable power on some devices.

KinScreen will not interfere with any other apps that already keep the screen on since it never actively turns it off.

The status bar icon changes based on if KinScreen is keeping the screen on, timing out, or timing out more quickly due to proximity. Inside the app, the colored statuses at the top give you even more insight into what KinScreen is doing. A green status is keeping the screen on, a red status is timing the screen out, and a yellow status would be keeping the screen on but there is another rule preventing it.

To calibrate motion sensitivity, please set the device on a very stable surface, tap calibrate and wait 10 seconds for KinScreen to automatically fine tune the motion sensitivity for your device.
您是否发现自己在拨动屏幕以防止其关闭？是否想在没有电源按钮的情况下打开屏幕？在使用手机时，KinScreen会自动使屏幕保持打开状态，但在不节省电池电量的情况下，可以更快地关闭屏幕。

请检查www.dontkillmyapp.com以确保KinScreen能够在后台运行！
简要概述 
•用波浪打开屏幕
•放在口袋里或面朝下时，请在短时间内关闭屏幕
•仅通过手持设备即可保持屏幕显示
•在使用某些应用程序时保持屏幕显示
•充电时保持屏幕打开
•通话时保持萤幕开启
•使用小部件，“快速设置”或通知开关无限期保持屏幕显示
•为锁定屏幕设置单独的超时
•设置最长时间以保持屏幕开启
•与三星的Smart Stay不同，它可在黑暗中工作
• 无广告
 
立即安装，忘了继续打开屏幕！感觉到好处后，您会立即发现它在新设备上缺失！ 
客户服务是TEQTIC的头等大事。如果遇到问题，请在应用程序中使用“联系支持”菜单选项或发送电子邮件至contact@teqtic.com，然后留下负面评价！我们通常在48小时内回复所有电子邮件，而且速度通常更快。
 
详细概述 
使用手势打开屏幕
打开或打开接近传感器上方的屏幕时，可以节省电源按钮的磨损。揭开传感器的位置，您可以将手机从口袋中拉出，并自动打开屏幕。当您的手变脏时，挥动传感器非常有用！
 
自动保持屏幕显示
从多种方法中进行选择，以检测设备的使用并保持显示器打开。运动方法仅握住设备即可检测到微小的运动。越过接近传感器是可选地延长超时的另一种方法。倾斜角度方法使显示器在支撑时仍可保持打开状态，即使您不握着它也是如此。您还可以选择在使用某些应用程序，充电或通话时保持显示器保持打开状态（当您将手机放在耳边时，显示器仍然关闭）。
 
快速显示时间以节省电池电量
当没有任何保持规则有效地使屏幕保持打开状态时，您可以选择屏幕超时。如果屏幕未保持打开状态，则应尽快超时以节省电量。当接近传感器被遮盖时（口袋内或正面朝下），超时时间甚至可能更短。您还可以为锁屏设置单独的超时。
 
更多信息 
这些设置可以根据您的喜好进行高度自定义。在免费版本中，参数的微调已锁定。请升级到高级版以完全解锁这些功能并支持未来的发展！根据用户反馈和功能要求，KinScreen不断得到改进。
  
KinScreen被设计为尽可能高效且电池友好。它占用很少的CPU和RAM，并且对传感器的使用进行了高度优化。但是，接近传感器可能会在某些设备上使用相当大的功率。
 
KinScreen不会干扰任何一直保持屏幕打开状态的应用程序，因为它不会主动关闭屏幕。
 
状态栏图标会根据KinScreen是否由于保持接近而保持屏幕打开，超时或超时更快而变化。在应用程序内部，顶部的彩色状态使您可以更深入地了解KinScreen的操作。绿色状态表示屏幕保持打开状态，红色状态表示屏幕处于退出状态，而黄色状态表示屏幕处于打开状态，但是还有另一条规则可以阻止该操作。
 
要校准运动灵敏度，请将设备放置在非常稳定的表面上，点击“校准”，然后等待10秒钟，以便KinScreen自动微调设备的运动灵敏度。


😲打开你的屏幕上用一波！一套规则和手势来打开画面ON / OFF。

KinScreen 🥇 Most advanced screen control

KinScreen 🥇 Most advanced screen control的最新版本

其他版本